Sweet… Ker 46+

Jason Ker har ju visat att han kan rita snygga & snabba offshorebåtar. Varuna och Tonerre är ju två av mina favoriter, och “gamla” Ker 46 Tonerre de Glen vann just klassen på Middle Sea Race.

Så vad sägs om den här skapelsen. Startpris USD 660k + allt annat man behöver för att driva ett projekt.

LOA 13.7m
Beam 4.4m
Draft 3.3m
Displacement 5,500kg
Fuel Capacity 61 litres
Engine Power 40 hp
Builder McConaghy Boats
Naval Architects Ker Yacht Design
ISO Structural CAT.A
ISO OSR CAT.1
Sail Plan
P 18.75m
E 6.22m
J 5.41m

A lot has happened in the four years since we created the successful Ker46, of which four were built and raced successfully including class wins in the Sydney to Hobart race and many other race wins. Our continually improving optimisation technologies have been honed through various pro-jects and it was clear that the time had come to bring out a new design. Replacing the Ker46 as our semi-custom offering in the size range, the Ker46+ uses as its generational baseline the heavily researched Ker40+ that came out guns-blazing in 2015 winning class in the Around the Island race on its first race outing and comfortably winning the first ever ‘Fast 40’ regatta

1.Shape and Concept

The Ker 46+ is significantly lighter than the previous generation, but its powerful hull form ensures excellent upwind and reaching performance. The hull shape is the product of an extensive formal optimisation involving large volumes of RANS CFD data, leveraged through use of Neural Networks and proprietary optimisation techniques. The optimisation process for the 46+ benefits from real data and feedback from our recent projects.

2.Structure

Taking the structural optimisation to levels rarely seen outside of Americas Cup, the final lamination is the product of structural weight v stiffness optimisation, and the deflection of the shape under sailing loads is taken into account in the definition of the moulded shape. Construction is from pre-preg Carbon and carefully selected foams throughout; a large weight saving from the build method used on the infused Ker46 design.

The keel and mast support structure follows our tried and tested approach, built in the autoclave on machined aluminium moulds for reliability and accuracy.

3.Appendages

An extensive keel shape optimisation has been carried out, achieving very significant section drag gains downwind without compromising upwind gains. These downwind gains have been used to increase the fin area, making the design easier to sail to its potential in variable conditions.

During recent years we have evolved our approach to keel fin structures, retaining our extremely cautious approach while taking advantage of extensive FEA structural optimisation and IRC’s new freedom of keel fin material and processing selection to save considerable weight.

The rudder design uses an optimal blend of high modulus, intermediate modulus and standard modulus carbon fibre types to maximise its strength and stiffness within its design constraints, and is solid carbon right through its thickness in way of the critical lower bearing position.

4. Rig

The rig aspect ratio is reduced compared to the previous 46, partly due to better sail depowering behaviour, reduced rig weight and better treatment by ORCi’s aero model. The bowsprit length has increased significantly and the bowsprit design has been optimised for weight, stiffness, wind-age and reliability of installation.

5. Deck layout

The ‘coachroof’ shape of the previous Ker 46 is retained, with its optimal jib sheeting arrangement on the apex of a long coachroof, however the jib tracks have been extended inboard to allow tighter sheeting angles. This arrangement allows for a more practical interior space for venturing offshore than the fully ‘flat deck’ arrangement that has become fashionable for inshore racing, but does so while actually saving weight through the incorporation of natural deck stiffeners into its shaping.

6. Foredeck chanfer

The New 46+ has a chamfer incorporated into the fordeck to improve aerodynamic efficiency and save weight.

2 Comments

  1. Pelle Pedersen Nov 2, 2017 Reply

    LOA 46ft
    DSPL 5,5 ton
    Nice!!

  2. Magnus Myrenberg Nov 3, 2017 Reply

    Sweeeeeet!

Leave a reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.